Forums  

Go Back   Forums > Repairs and Fixes.

Reply
 
Thread Tools Display Modes
  #1  
Old 01-11-2009, 02:33 PM
Gibbmodoll's Avatar
Gibbmodoll Gibbmodoll is offline
Administrator
 
Join Date: Oct 2009
Location: Madley in Herefordshire Uk.
Posts: 490
Thumbs down Nissan Almera, W plate, no start.

Customers complaint, no start,

A DTC is set it is P0335 the crank sensor, and they can fail on the older cars the cam sensor too, it is a hall type at bottom of the flywheel.
The red cable = the output, black ground, there should be switching with the motor cranking.
You will need a scope to test for the sig: and a good pull down to ground.

We found no sig: and the sensor is faulty, sold as two cam and crank, the cam sensor is on the front of the motor.
Note we see a lot of cars coding crank or cam sensor, but running ok, test the sensors if ok the fault maybe the timing chain , there will be little or no noise from them.
__________________
All the best Gibbmodoll.
(Gibbins Motors Technology and Gibbmodoll Uk Group).
The more you know, the less you know.
Here is one more great site run by the Group,

http://www.uklovedollforums.co.uk/home.php
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:30 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.